Product Description
Grommet Mount Base, 24 inch Pole, Fixed Height Monitor Arm on Rotating Clamp, with Ingenico isc250
Features
Grommet Mount Base, 24 inch Pole
- Cast steel grommet mount base that securely mounts to a work surface and houses a two inch diameter pole
- Twenty-four inch long pole with two inch diameter. Made of steel.
- Powder coat painted pole and grommet mount base
- Pole stop bracket to prevent the pole from sliding completely through the hole
- Molded cap installed on the top of the pole
- Pole includes a top and bottom cut-out hole for easy cable management
- Hardware kit included
- RoHS compliant
Extension Arm, Double Pivot, Flat Panel Monitor Mount, Rotating Clamp
- Cast steel rotating clamp for 2 inch diameter pole
- Rotating stop allows you to stop rotation at 0-180 degree or 360 degree rotation
- Solid steel Flat Panel Monitor Mount and Extension Arm, double pivot (up/down & left/right)
- VESA compliant. Monitor mount will accommodate 75 mm and 100 mm VESA compliant monitors, up to 20 lbs
- Powder coat paint on the clamp and monitor mount
- Hardware kit included
- RoHS compliant
Payment Device Arm, Rotating Clamp
- Cast steel rotating clamp for 2 inch diameter pole
- Rotating stop allows you to stop rotation at 0-180 degree or 360 degree rotation
- Fixed length arm to mount Payment Terminal Stand. Steel construction.
- Cable management
- Powder coat paint on the clamp and arm
- A hardware kit includes three Phillips head screws to mount the Payment Terminal Stand, cable clip and screw and four socket screws to tighten the clamp on the pole
- RoHS compliant
Payment Terminal Mount for Ingenico isc250
- Swivels 180 degrees
- Tilts up to 0-90 degrees to help meet ADA compliance
- Compact design
- Cable strain relief
- Open hole for cable management
- No metal on metal contact
- No knobs or levers
- Field adjustable
- Hardware kit included
- RoHS compliant
Specs
Grommet Mount Base, 24 inch Pole
- Grommet Mount Base Dimensions: Height 2 inches, Width 3.5 inches and Depth 3.5 inches
- Pole Dimensions: Height 24 inches, 2 inch diameter
- Total weight: 5 pounds
Extension Arm, Double Pivot, Flat Panel Monitor Mount, Rotating Clamp
- Extension Arm, Monitor Pivot and Pole Clamp Dimensions: Height 4.53 inches, Width 4.53 inches and Depth 9.69 inches
- Weight: 3 pounds
Payment Device Arm, Rotating Clamp
- Payment Device Arm and Rotating Pole Clamp Dimensions: Height 1.73 inches, Width 4.76 inches and Depth 12.02 inches
- Weight: 2 lbs
Payment Terminal Mount
- Open Hole Swivel Base: 4.75 inches in diameter
- Weight: 2 lbs
